CNC MACHINING / SPECIAL MACHINES AND TOOLING / SINCE 1987
636 KOLLAR ST. ELKHART, IN 46514       Phone (574) 295-8036 Fax

This is a missile nose-cone antenna array test fixture. It was machined from a 10-1/4" dia. 6061 aluminum round. It is 13" long plus the 6" long base that it is assembled to. The wall thickness gets as small as .050" in some areas!

Brass Bell, Yoke, Finial and Clapper Assembly for an 1872 Steam Locomotive.
Replacement parts for a restoration project, made to exacting original specifications.
The bell is 18" in diameter and weighs about 130 lbs.
Yoke pattern by Protogenesis.
Here you can download WAV files to hear the bell ring:
A few rings, (9 K)                            Many rings, (2.1 M)   

Vacuum form mold with 4 inserts. 3-D machining from customers' CAD file. Approx size: 28" x 20" x 3"
Here is a picture of the part.

---

Tube forming die. Developed from a laser scanning of a hand made prototype of the part, then machined from the 3D CAD file in D-2 tool steel. About 5 inches x 8 inches.

4 Axis Robotic Manipulator Arm
Radio Controlled Hydraulic Arm for placing and holding ceramic shrouds
for the Continuous Caster at Bethlehem Steel (now ISG). One of three units.

For More examples, click here.